Properties of Concrete [useful information]
Knowing the properties of concrete is a must to structural engineering who engine with the…
3 years ago
Single Angle Section Design Worked Example
Single angle section design using EN 1993-1-1 is discussed in this article by a worked…
3 years ago
Under Reinforced Section Design
Becoming section under reinforced section than over reinforced section is good in structural design. Under…
3 years ago
How to Check Section is Over Reinforced
The over-reinforced section is considered critical when compared with the under-reinforced condition. If over-reinforced, the…
3 years ago
Balanced, Over Reinforced and Under Reinforced
Depending on the strain of the section, categorization of the sections is done as a…
3 years ago
Steel Column Design EC3 Worked Example
Steel column design according to Eurocode 3, EN 1993-1-1, is discussed in this article by…
3 years ago
Steel Column Design using Eurocode 3
Steel column design for Eurocode 3, EN 1993-1-1, is discussed in this article. Each design…
3 years ago
Concrete Mixing
Concrete mixing combines all its ingredients as required following the mix proportions of the relevant…
4 years ago
Assess In-Situ Compressive Strength of Structure
The compressive strength of concrete and yield strength of the steel are two main material…
4 years ago
Concrete Admixture Testing
Concrete admixture testing needs to be done to make sure it complies with the supplier's…
4 years ago