Foundation Waterproofing
Generally, all the structures constructed below the ground level where the water table is near to the ground level, are […]
Foundation Waterproofing Read Post »
Generally, all the structures constructed below the ground level where the water table is near to the ground level, are […]
Foundation Waterproofing Read Post »
Ground improvements are done specially for shallow foundations when they are constructed in weak soils. Based on the classification of
Ground Improvements [which and how] Read Post »
Concrete structures are protected by waterproofing to avoid them from contact with the water or to avoid it absorbing the
Concrete Waterproofing Read Post »
Setting out of the slab is check before starting the slab and after reinforcement was tied to make sure it
Methods of Setting Out of Slabs Read Post »
Concrete column forms are developed from simple shuttering systems to more complicated systems that are using modern construction. It saves
Concrete Column Forms [Design & Construction] Read Post »
Soil bearing capacity, soil properties, soil skin friction, rock skin friction, end bearing of rock, etc. should be available to
Geotechnical Investigation – a guide to design Read Post »
BS 8007 has recommended using grade C35A concrete with have limitations in the cement content and the water-cement ratio. The
C35A for Structures Retaining Aqueous Liquids Read Post »
Screed is a flat surface created with concrete or with cement sand mix to lay the concrete. Depending on the
Curtailment of beam reinforcements is discussed in this article. Different detailing techniques applied as per the various guidelines are explained
Curtailment of Beam Reinforcements Read Post »
Hot dip galvanizing is a kind treatment to the steel elements to be used in construction. It provides a guarantee
Hot Dip Galvanizing -The Facts to be Aware Read Post »
The steel beam design worked example elaborates the design of a simply supported beam having a uniformly distributed load. The
Steel Beam Design Worked Example [Universal Beam] Read Post »
The lateral torsional buckling is the deformation of the beam due to the applied loads away from its longitudinal axis.
Lateral Torsional Buckling [Theory and Calculation] Read Post »