Structural Detaling

In this article were are concentrating on column reinforcement details and the basic requirement to be adopting column rebar detail

Slab reinforcement details should be done by following the relevant code of practices and standards method of detailing of reinforcements.

Beam reinforcement details shall be done in accordance with relevant standards methods of detailing. There are different guidelines developed in

Most of the structures constructed under the ground are waterproofed to protect the structural damage caused by the penetration of

Curtailment of beam reinforcements is discussed in this article. Different detailing techniques applied as per the various guidelines are explained

Movement Joints in structures can be seen very commonly as they make the structure stable, constructible and reduce the cost

The minimum percentage of reinforcement for beam, column and slabs can be found from the table 3.25 of BS 8110

The maximum area of reinforcement can be found under the clause 3.12.6. It states the reinforcement ratios for columns, walls,

Knowing the correct lap lengths and anchorage lengths are very very important when reinforcements are detailed. Inadequate anchorages and lapping

Hanger Shear Reinforcement Bars Hanger bars shall be provided in concrete beams that support secondary beams. Reinforcement shall be provided